This article has been discontinued, it is no longer available and will not be renewed.

Waterborne Wood Tone Sealer by Mohawk

Discontinued

Mohawk Waterborne Wood Tone Sealer has a slight amber cast that adds warmth and richness to stain colors similar to a solvent based sealer look.

Waterborne Wood Tone Sealer may be used as a sanding sealer for both Waterborne Pre-Catalyzed or Waterborne Conversion Varnish topcoats.

No catalyst is needed and it is ready to spray from the can. Waterborne Wood Tone Sealer is not recommended over white or other opaque colors.

  • Low odor, water clean up
  • Easy to apply, dries quickly
  • High solid content
  • Self-leveling
  • Mild, non-annoying odour

For Professional Use Only

Directions for Use

Preparation

Stir thoroughly before using.

Application

Apply Waterborne Wood Tone Sealer in light, even coats of 3-4 wet mils. Always scuff sand previous coat with 320 grit sand paper and remove any sanding dust from the surface before applying any additional coats. Apply appropriate sheen of the desired type of Mohawk Waterborne topcoat.

Total finishing system, including sealer and topcoats, should not exceed 4 dry mils. Waterborne sealers and finishes are high solids, quick building products. Excessive finish build can lead to a cloudy finish especially in lower sheens, cracking, cold checking and other finish failures.

Waterborne Wood Tone Sealer may be tinted with Mohawk Waterborne not to exceed 10% addition by volume.

Specifications

Classification Wood Lacquers
Brand Mohawk
Sold Since September 30, 2019
Coverage

130 sq. ft. / L

VOCs

179 g / L

Origin

USA

Dilution

Water as needed

Tools cleaning

Soapy water

Color

Amber

Solids

57 %

Similar Products

Customers who bought this item also bought

Review

There is currently no review for this product. Be the first to submit one!

          

Terms of Sales · Privacy · Cookies · En français