Proper glaze to use with EM6500

JoeM · Jul 12, 2018, 14:57

Hi, I am new to the Target EM6500. I would like to finish a bed set with the EM6500 and use a glaze to enhance the look. Target does not seem to cover the use of a glaze?? What glaze (product) would you recommend, and would the application be EM6500/Glaze/Clear coat?

Also, would you recommend using the Target primer/filler, and what clear would be best to use?

Finally, I will be using a Fuji Semi-Pro2 gravity. Any suggestion on tip sizes would be greatly appreciated.

Thank you!
Joe

René Carrier · Technical Support · Jul 13, 2018, 12:42

Hello Joe,

Normally to finish with glaze, we recommend two coats of HFS5000 white, followed with two coats of EM6500; afterwards you apply your glaze, once dry, you finish with two coats of Superclear 9000 to protect everything.

We do not sell glaze but you can check with a paint dealer to get a glaze in the color of your choice.

You should use 1.8 mm for coloured products and 1.6 mm for clear products.

JoeM · Jul 13, 2018, 12:57

Thank you, Ren'e.

Exactly the info I was looking for, right down to tip sizes. Been trying to email Jeff @ Target for over a week to get the same info. He must be in the Bahamas vacationing...

          

Terms of Sales · Privacy · En français