Preparation
On raw wood, sand with the grain using #120 and finishing with #220 grit paper. On stained wood, sanding with #320 or finer paper or buffing with a buffing pad is optional. Do not sand through the stain.
Application
- Stir well, prior to use.
- Using a foam brush or paint pad applicator, apply Enduro-Var liberally using smooth, even strokes going with the grain.
- Use enough material to provide a wet film. Do not over brush. Apply and move on.
- Sand between coats using #320-#400 grit paper or extra fine to super fine sanding pads. Remove dust before recoating.
- A minimum of 3 coats is recommended. Additional coats may be applied to increase durability and depth.
Dry Time
Dry time is normally 2-4 hours under ideal conditions (70°F or 21°C, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.
Important Notes
Enduro-Var is self-sealing. Do not use over Shellac or any other sanding sealer. Oil based stains must be completely dry before using a water based top coat. Wait a minimum of 48 hours before applying.
