UV-Protection-Oil by Osmo

5/5 · 3 reviews
In stock
$3.50
Free Delivery
on orders over $90
Quebec, Ontario · More info

This product is not recommended for horizontal surfaces. Osmo UV-Protection-Oil is a satin-matte, clear finish for interior and exterior application with a great variety of uses. It is natural oil based and micro-porous, and does not crack, flake, peel or blister.

When used as a final finish after staining wood Osmo UV-Protection-Oil prolongs the renovation time significantly. However, when used as a complete finish by itself it blocks the greying process by UV-Protection factor 12 in comparison to untreated wood.

Osmo UV Protection Oil is recommended for all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and windowsills, carports, timber cladding, balcony, screens & fences, pergolas and garden houses.

This product is not recommended for horizontal surfaces. Osmo recommends their Decking-Oil.

Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.

Directions for Use

Variants

5 ml (sample) · 420 – Clear Extra (with biocides) $3.50 In stock
5 ml (sample) · 425 – Oak Extra (with biocides) $3.50 In stock
5 ml (sample) · 428 – Red Cedar Extra (with biocides) $3.50 In stock
5 ml (sample) · 429 – Natural Extra (with biocides) $3.50 In stock
750 ml · 410 - Clear (no biocides) $60.00 In stock
750 ml · 420 – Clear Extra (with biocides) $60.00 In stock
750 ml · 425 – Oak Extra (with biocides) $65.00 In stock
750 ml · 428 – Red Cedar Extra (with biocides) $65.00 In stock
750 ml · 429 – Natural Extra (with biocides) $65.00 In stock
2.5 L · 410 - Clear (no biocides) $172.00 In stock
2.5 L · 420 – Clear Extra (with biocides) $172.00 Out of stock
2.5 L · 425 – Oak Extra (with biocides) $184.00 In stock
2.5 L · 428 – Red Cedar Extra (with biocides) $184.00 In stock
2.5 L · 429 – Natural Extra (with biocides) $184.00 In stock

Specifications

FAQ

Can Osmo UV-Protection-Oil 420 be applied to a Western Red Cedar shingle siding?

The use of Osmo UV-Protection-Oil is highly recommended to protect cedar from UV rays and to prevent color changes due to wood aging. This oil offers UV protection with a factor of 12 for vertical surfaces (which means UV protection is 12 times higher than untreated wood).

For optimal results, it is recommended to apply two coats at an interval of 12 hours. One option is to apply a first coat of Osmo One Coat Only Stain to color the cedar, followed by one or two coats of UV Protective Oil. It is also possible to use a colored version of this UV oil. It is important to carefully read the product data sheet to understand the instructions for use and maintenance necessary over the years.

Similar Products

Complementary Products

Review

Refinishing door

Chris Cohlmeyer · Sep 27, 2023

Brings out natural weathering and evens sanding variations for a great looking protective finish on the door.

Excellent Product

Peter M Fillmore · May 23, 2023

Used to protect patio furniture. It makes grain of the cedar lumber pop.

There is 1 review in French for this product.

Display Reviews in French
          

Terms of Sales · Privacy · Cookies · En français