Is it possible to achieve a finish on PVC cabinets whose coating is in very good condition, despite yellowing over the years?
It is entirely possible to achieve a finish on PVC cabinets. The key to success lies in the meticulous preparation of the surfaces. Firstly, it is important to thoroughly clean the cabinets with TSP to remove any accumulated dirt or grease. Next, the surfaces should be sanded with 100-grit sandpaper to improve adhesion. Once sanded, it is important to clean the cabinets with a mixture of water and Denatured Alcohol. Finally, you can choose between a handcrafted finish with a brush or roller, or a professional finish with a spray gun, depending on your preferences. The choice of finish will dictate the products to use for the project. By following these steps, you can achieve a professional quality finish on your PVC cabinets.
Last updated on July 11, 2023
Similar Articles
How to achieve professional finishing results without using a HVLP system / spray gun?
Why should Spray gun application of decorative paints be avoided?
How to lower the sheen on an epoxy finish?
Is it possible to change the color of kitchen cabinets without stripping them while also preserving the wood grain?
Do you have to sand a completely bare varnished floor down to bare wood or can you simply refresh it?