Fuji Spray's Mini-Mite 4 HVLP System, from its T-Series line, uses the most powerful 4 stage turbine available on the market today. It is recommended for those who require extra power, as the Mini-Mite 4 produces a full 9 psi.
This system contains:
Fuji Spray® has designed a unique method of removing any heat build up from the turbine case. Excess heat is channeled to a Heat Dissipation ChamberTM located at the rear of the case.
Since the hot air is dissipated evenly through an optimum surface area of 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of debris.
The benefits of a cooler running unit results in a longer life for your turbine motor compared to standard turbines.
The Mini-Mite™ PLATINUM Turbines are equipped with a method to reduce noise. The Noise Reduction Covers™ house the Filters. Ambient air is entrained only from the rear effectively removing any Direct Sound Paths. Air is drawn in through a large Rear Aperture and through specially designed ‘Finger Slots’ for optimum performance.
This control allows the operator to switch from a circular to oval pattern and anywhere in between.
Unlike traditional HVLP turbine spray guns with the front collar adjustment, the Side-Mounted Fan Pattern Control™ offers full incremental fan size throughout the whole range. Located on the left side of the spray gun for convenience, it is easy to adjust: turn counter-clockwise for a smaller pattern and clockwise for larger.
For more material capacity and maneuverability, Fuji Spray's 4 and 5 stage HVLP turbines can be used with a 2 Qt. Pressure Pot.
Canada
12" x 8.6" x 8.1"
2 years – Parts & Labor
25 feet (7,6 metres)
15.00 lbs
9 psi
4-Stage
Paul Nettleship · Dec 30, 2020 · Edit · Delete
I was on the fence for years about getting a HVLP system, I tried using cheaper air compressor guns but with my smallish compressor it never went well. I almost never managed to get a good finish without something really going wrong, too much overspray, wasting tons of material, too much material going on, drips etc.
Finally I got the fuji, though it took a bit of dialing in, its so much easier than trying to figure out what I'm doing wrong. I went from not being able to spray much to actually being able to lay nice coats and finish projects so much easier.
sebastien thomas · Dec 16, 2020 · Edit · Delete
Bought the Mini-Mite 4 G-XPC from #FujiSpray Great product, strong quality, great air flow !
Ordered at noon received the next day ! Thanks #Ardec
There is 1 review in French for this product.
Be the first to know about our new products and sales.
Terms of Sales · Privacy · En français
