Quietest 3-stage Turbine Motor on the market. The Q3 Platinum™ 3-stage Turbine Motor develops approximately 6.5 psi. and is installed with the added feature of noise-reduction. The Fuji noise reduction method is patented in the USA.
Research & Development was conducted by engineering staff at Carleton University in Canada under a partial Government grant program. Noise is reduced by over 50% making this the quietest 3-stage system available today. This system is ideal for Cabinet Makers and Furniture Refinishers. Perfect for any type of fine-finishing.
This system contains:
The Q PLATINUM™ Series reduces noise to less than 50% compared to previous levels without causing any unwanted side effects such as overheating or air restriction. In fact, when the Q PLATINUM™ turbine is placed across the room, the low hiss of air passing through the spray gun is more noticeable than the turbine motor itself. Fuji Spray has the quietest spray system on the market!
Fuji Spray® has designed a unique method of removing any heat build up from the turbine case. Excess heat is channeled to a Heat Dissipation ChamberTM located at the rear of the case.
Since the hot air is dissipated evenly through an optimum surface area of 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of debris.
The benefits of a cooler running unit results in a longer life for your turbine motor compared to standard turbines.
This control allows the operator to switch from a circular to oval pattern and anywhere in between.
Unlike traditional HVLP turbine spray guns with the front collar adjustment, the Side-Mounted Fan Pattern Control™ offers full incremental fan size throughout the whole range. Located on the left side of the spray gun for convenience, it is easy to adjust: turn counter-clockwise for a smaller pattern and clockwise for larger.
Canada
Turbine: 14.87” x 11.5” x 9”
2 years – Parts & Labor
Turbine: 22.29 lbs
6.5 psi
3-Stage
James Paul Hutton · Mar 24, 2023 · Edit · Delete
I love this system, after using a compressor for years I made the switch. I spray mostly nitrocellulose lacquer and have the gravity spray gun with the 1.3 nozzle. After only about five minutes of adjustment I was spraying fine, even coats with little overspray. The whole system seems very well built and the turbine is small and portable so that I am not hauling around my old compressor on wheels. Be sure when using the gun that the cap is secure because the cup is pressurized and will leak material if loose. I also bought the Fuji touch up gun and will provide feedback when I have a chance to try it.
Patrick Bird · Jan 30, 2022 · Edit · Delete
Just got my hands on the q3! Don't need to wear hearing protection anymore. I have sustained several head and blast injuries while in the army and my old hvlp sprayer was killing me slowly lol! Love this sprayer. It's only 60db and sprays fantastic.
#FugiSpray
Be the first to know about our new products and sales.
Terms of Sales · Privacy · Cookies · En français
