I jave searched in many technical sheet but haven't been able to confirm this info. I a video O saw that you should not use use the em6500 over the sanding sealer em1000.
my goal here is to use dilute the sealer 1:1 with water to use as a prestain and let it dry/cure for > 24h apply the stain then use the em6500 as a light toner coat.
Is it really that problematic and if so why?
Thanks for contacting Ardec!
Normally a primer would be applied before the EM6500.
If you wish to use the EM6500 as a light toner then you would need to dilute the EM6500.
Hope this answers your questions.
Be the first to know about our new products and sales.
Terms of Sales