RMC Pre-Aging by Rubio Monocoat

5/5 · 1 review
from $35.99
Free Delivery
Quebec, Ontario · More info

Rubio Monocoat Pre-Aging is a high quality, non-reactive water-based pre-treatment. RMC Pre-Aging provides an aged appearance to new floors, a very popular trend. The color scheme consists of lighter colors and darker colors for a smoky appearance.

Colors can be mixed together and can also be diluted to achieve the desired shade. On the other hand, there is a palette of gray colors that can be mixed with each other. The result is an intense coloring with subtle accents.

Besides the actual smoking or burning of wood, there are many reactive products to give the wood a smoky or gray appearance. But RMC Pre-Aging is a non-reactive treatment that can be applied to almost any wood species.

RMC Pre-Aging is a pre-treatment and must always be finished with RMC Oil Plus 2C. The combination of these products enables creative effects while the optimum molecular binding of the RMC Oil with the wood continues to be guaranteed.

Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.

Dierctions for use

Manual application:
1. Sand the surface to be treated without making scratches. Vacuum thoroughly and carefully remove the sanding dust.
2. Apply Rubio Monocoat Pre-Aging equally and in a saturated manner with a sponge, roller or HVLP system on the surface to be treated.
3. Even out with a beige Rubio Monocoat Scrubby Pad.
4. Leave to dry for about 24 hours.
5. Apply RMC Oil Plus 2C.

Application with the use of a polishing machine:
1. Sand the surface to be treated without making scratches. Vacuum thoroughly and carefully remove the sanding dust.
2. Apply in a saturated manner with a Rubio Monocoat Sponge, Rubio Monocoat Standard Brush, or roller.
3. Spread equally with a polishing machine, equipped with a beige Rubio Monocoat Pad.
4. It is advised to do this in an area of about 1 meter wide lengthwise of the room, so that no one needs to step
in the product when polishing again afterwards with a white Rubio Monocoat Pad to wipe dry the surface.
5. Leave to dry about 24 hours to apply further treatments. This may be an optional pre-colour or a protective finishing layer.

Advice:
Do take into account that the base colour, the grain structure and the porosity of the wood will affect the end result. A wood type with red undertones, for example, will have a different effect than new, pale pinewood. That is why it is important to apply a sample first.

Variants

100 ml · Authentic #1 $35.99 In stock
100 ml · Authentic #2 $35.99 In stock
100 ml · Fumed Intense $35.99 In stock
100 ml · Fumed Light $35.99 In stock
100 ml · Smoke Intense $35.99 Out of stock
100 ml · Smoke Light $35.99 In stock
1 L · Authentic #1 $128.99 Out of stock
1 L · Authentic #2 $128.99 In stock
1 L · Fumed Intense $128.99 In stock
1 L · Fumed Light $128.99 In stock
1 L · Smoke Intense $128.99 In stock
1 L · Smoke Light $128.99 In stock

Specifications

Classification Wood Stains and Dyes
Brand Rubio Monocoat
Sizes
  • 100 ml
  • 1 L
Sold Since August 31, 2021
Origin

Belgium

Storage

The product can be stored up to 12 months in dry conditions and in its original packaging. Keep in a well-ventilated place and keep away from frost.

Similar Products

Complementary Products

Review

Does what is says

John Carter · Aug 3, 2024

Bought to "age" a lot of white oak, flat sawn and quarter sawn being used for casing, cabinet parts and trim. Consistent results that align with samples published by Rubio. Breeze to apply, and more forgiving than stains. Don't forget you need a top coat! I'm using Rubio Pure.

          

Terms of Sales · Privacy · Cookies · En français