Preparation : Wait at least 10 days before starting the maintenance of freshly oiled floors. Vacuum or sweep with a broom to remove all residues.

Application : Shake well. Dilute 50 ml of Bonito per 4 liters of water (preferably warm). Wash the surface with this mixture. Rinse with clear water being careful not to wet the surface too much. Let the wood dry without rinsing.

Clean the surface using a mop, sponge or cloth with the prepared solution making sure to wring out the mop, sponge or cloth well. It is recommended to use two buckets: one with the prepared Bonito mixture, and the other with clean water in order to rinse the mop and eliminate accumulated dirt.

Let the floor dry without rinsing.

The Bonito must be diluted with water only.

Important: When cleaning wood floors, you must never saturate the floor with water, you must wipe well with a mop, sponge or cloth which has been well wrung.

• Temperatures below 0°C can cause the product to freeze: should this happen, simply let the Bonito sit for a few hours at a temperature above 20°C and it will be restored.

Tools of application : Sponge mop, cloth.