Preparation:
Stir well with a stick before and while applying. Do not shake. Do not apply under sunlight or at a temperature below 10 °C. The wood must be clean and sanded with a 80 grit sandpaper prior to application. The moisture content of the wood must be less than 20%.
It’s possible to mix some Colorless Pareo Zero to the colored version in order to decrease the color intensity.
Application:
Apply with a stain brush, a stain pad or a Flock Foam Floor Applicator. If more than 24 hours have passed since the first application, sand lightly with a 120 grit paper before the second application.
For more information, read the technical data sheet available online at prato-verde.com
he use of a spray gun is highly unsuitable for vertical application.
For horizontal surfaces, wipe off any excessive oil after spray gun application.
2 coats of Pareo Zero Colorless or Natural can be applied in order to preserve the wood’s original color.
It is not recommended to use Pareo Zero Natural color on exotic woods, torrefied woods or restored woods (stripped and sanded).
Number of coats :
- Horizontal surfaces: 2 coats
- Vertical surfaces: 1 or 2 coats
Drying time:
- Water resistance: 3 hours
- Between coats: 6 to 18 hours depending on the moisture content of the wood
- Cautious traffic: 12 hours
- Complete drying: 2 days
