Fix.Oil - Finishing Oil by Vermeister

from $45.95
Free shipping
on orders over $90
Quebec, Ontario · More info

Fix.Oil Vermeister is a finishing treatment based on natural oils and waxes for wood floors, furniture and woodwork. Applied after the protective primer Pro.Oil colored or natural, it protects the wood from water and other substances in daily use (coffee, alcohol…), preventing permanent staining.

Use of Fix.Oil increases the resistance to abrasion of oiled floors.

Directions for use


Shake well before use.

Professional Application

Fix.Oil should be applied in a thin, even coat to floors that have been previously treated with Pro.Oil colored or natural and are perfectly dry (see relevant technical data sheet) using a roller (black with short hair), brush, pad, spatula.

After about 5/15 minutes, polish with a single disc machine with a white or beige disc (excessively long intervals may make polishing difficult and in the case of high quantities of product an absorbent cloth must be placed under the disc to soak up the excess oil).

Fix.Oil may also be applied directly using a single disc buffer and a white or beige padc, adding small quantities of product to the centre of the pad and massaging until it is spread evenly.

Fix.Oil can be applied directly with the single disc machine and the grey felt disc adding small quantities of product to the centre of the disc and massaging until it is even.

Manual application:

Apply with a paint applicator, cotton rags or a stain pad. After 5 to 15 minutes, wipe off the surface with a cloth to remove any excessive oil.


The surfaces are ready for traffic after just 2/3 days, but reach their maximum level of protection after 7/10 days. Therefore, it is advisable not to wash these surfaces (even with just water) or cover the oiled surfaces with carpets, cardboard or sheets before this interval has elapsed.


1 L $45.95 In stock
3 L $119.95 In stock


Classification Oils & Oil Finishes for Wood
Brand Vermeister
  • 1 L
  • 3 L
Sold Since June 12, 2018

Mixture of vegetable oils and wax, de-aromatized mineral spirit and drying agent without cobalt.

Drying Time
  • Ready for overcoating: 12 to 24 hours
  • Ready for light traffic: 24 to 48 hours
  • Ready for careful use: 3 to 5 days
  • Completely hard: 7 to 10 days
  • Mechanical application: 200 to 330 sq ft / L
  • Manual application: 150 to 275 sq ft / L



Low fruity odor




The maintenance of oiled floors must only be carried out with Soap.Oil and Oil.Care and must only begin once the finishing oil is completely hard.


Roller, brush, pad, trowel, single disc buffer

Similar Products

Complementary Products


There is currently no review for this product. Be the first to submit one!


Terms of Sales · Privacy · En français