Preparation

Shake well before use.

Professional Application

Fix.Oil should be applied in a thin, even coat to floors that have been previously treated with Pro.Oil colored or natural and are perfectly dry (see relevant technical data sheet) using a roller (black with short hair), brush, pad, spatula.

After about 5/15 minutes, polish with a single disc machine with a white or beige disc (excessively long intervals may make polishing difficult and in the case of high quantities of product an absorbent cloth must be placed under the disc to soak up the excess oil).

Fix.Oil may also be applied directly using a single disc buffer and a white or beige padc, adding small quantities of product to the centre of the pad and massaging until it is spread evenly.

Fix.Oil can be applied directly with the single disc machine and the grey felt disc adding small quantities of product to the centre of the disc and massaging until it is even.

Manual application:

Apply with a paint applicator, cotton rags or a stain pad. After 5 to 15 minutes, wipe off the surface with a cloth to remove any excessive oil.

Notes:

The surfaces are ready for traffic after just 2/3 days, but reach their maximum level of protection after 7/10 days. Therefore, it is advisable not to wash these surfaces (even with just water) or cover the oiled surfaces with carpets, cardboard or sheets before this interval has elapsed.