Preparation

Shake well before every use. Vacuum or sweep with a broom before application in order to remove any residues. In an atomizer spray bottle, mix one part Sancio Concentrated Protector for Oiled Woods with 4 to 5 parts water. Stir the mix thoroughly to ensure a proper emulsion of the oil and water mix.

Application

Spray a thin coat of the prepared mix on an area of the surface to be treated. Spread evenly, following the wood grain direction with a sponge or cotton mop. Let the surface dry without rinsing. Don't apply too much product to avoid a sticky or uneven surface.

The surface can be lightly walked on 30 minutes after application, but it is recommended
to allow the surface to completely dry for 12 hours.