Titebond Instant Bond Adhesive by Titebond

4.7/5 · 3 reviews

01:29

Titebond Instant Bond

18:47

Woodworker's Guide to Titebond Glue

23:09

The Woodworking Problem Solver | CA Glue

Titebond Instant Bond Adhesive by Titebond

4.7/5 · 3 reviews

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

Fast set - Eliminates clamping or reduces clamp time
Bonds stronger than wood
Excellent heat and solvent-resistance
Unaffected by finishes
Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
2 year shelf life
Triple distilled for purity & consistency
Impact-resistant
No-clog applicator for easy use and waste reduction

Two-part bonding system

Titebond Instant Bond adhesives are designed for use with Titebond Instant Bond Accelerator. Only the thin version can be used without the accelerator.

Documents

Safety Data Sheet

Available in 4 viscosity

Titebond Instant Bond Thin viscosity product offers the fastest assembly time of 5 seconds and an initial cure speed of 3 seconds. It is ideal for repairing hair line cracks and small defects in wood, as well as repairing loose veneer edges. It can also be used as a finish. While Titebond Instant Bond Activator can be used to further reduce set times, it is not required for producing strong, tight-fitting joints.

Titebond Instant Bond Medium viscosity product offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. In addition to typical bonding applications, it is ideal for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications, and for soaking end-grain to prevent splitting.

Titebond Instant Bond Thick viscosity product offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. It is ideal for bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.

Titebond Instant Bond Gel viscosity product offers the longest assembly time of 30 seconds and an initial cure speed of 20 seconds. It is ideal for gap-filling applications, gluing porous and odd-shaped surfaces and various cabinet making applications, such as pre-bonding moldings to install as one unit.

Directions for Use

Ensure the surface is clean and dry. If dust or dirt is on the intended bonded surface, use a small amount of acetone until clean. Acidic surfaces (wood with dark tannic acids, some leathers and metals) can inhibit curing of the Instant Bond adhesive. Use the Titebond Accelerator to start the curing process or, spray one side with Titebond Accelerator and spread Titebond Instant bond on the other surface for an instant bond

Instant Bond can be used in temperatures from -65°F to 200°F. Not recommended for exterior use due to slight softening of the adhesive with water.

Limitations

Titebond Instant Bond is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.

Variants

2 fl oz (56.8 g) · Gel 76231	$18.95	In stock
2 fl oz (56.8 g) · Medium 76211	$15.95	In stock
2 fl oz (56.8 g) · Thick 76221	$15.95	In stock
2 fl oz (56.8 g) · Thin 76201	$15.95	In stock

Specifications

Classification	Wood Glues
Brand	Titebond
Size	2 fl oz (56.8 g)
Sold Since	October 20, 2020
Composition	Ethyl cyanoacrylate
Drying Time	Thin: 5 second handling, 3 second set, 30 second cure. Medium: 7 second handling, 5 second set, 30 second cure. Thick: 10 second handling, 8 second set, 30 second cure. Gel: 30 second handling, 20 second set, 60 second cure. Full cure in 8 hours
VOCs	20 g / L
Origin	USA
Storage	2 yrs in tightly closed bottles stored between 40° & 75°F
Tools cleaning	Use acetone. Follow solvent vendor’s precautions.
Viscosity	Thin: 5 cps Medium: 120 cps Thick: 2,400 cps Gel: 60,000 cps
Dried film	Translucent
Solids	100%
Freeze/thaw stability	Stable
Application Temperature	Above 50°F (10°C)

FAQ

How to use Titebond instant glues optimally?

Titebond Instant Liquid Glue offers excellent bonding capacity and is effective for filling holes and cracks during sanding. It is commonly used in woodworking, cabinetry, and model making projects due to its strong adhesion and quick drying. It is also favored by finishers for filling small defects in epoxy, varnish, and lacquer. This glue allows for immediate work as it bonds two pieces of wood in seconds. It provides durable adhesion, solidifying in 3 seconds and fully hardening in 5 seconds.

Titebond Instant glue is commonly used in woodworking and cabinetry projects due to its strong adhesion and fast drying. It is also popular in the modeling field and other precision-related tasks. Some even use it for jewelry making to adhere ornaments.

Titebond Instant Glue comes in four versions: liquid, medium viscosity, thick viscosity, and gel. Depending on the specific needs, an accelerator may be required. It is essential to carefully read the manufacturer's instructions and take necessary precautions when using this instant glue, as it can cause skin irritation and emit potentially harmful vapors.

By familiarizing yourself with the available glues, you can save time and money on your projects. Remember to follow the usage instructions and take appropriate precautions for safe application of instant glue.

Review

CA glues

Jeff Poxon · Jun 11, 2021 · Edit · Delete

I don’t know why but it just seems to be better than other CA glue brands I’ve used. The caps are definitely better. They have a small needle that pierces the tip to keep it open.

There are 2 reviews in French for this product.

Display Reviews in French

Titebond Instant Bond Adhesive by Titebond