Directions (spray can):
Shake before using. Hold can upright 6” from surface. Spray lightly. Polish right away with a soft clean-cloth. For small areas, spray cloth, then polish. OZ POLISH does not require excessive rubbing – the surface brightens immediately and will not show fingerprint marks. Previously waxed and oil polished surfaces can cause smudging because of build-up. If so, remove with mild detergent and warm water before applying OZ POLISH. Keep from freezing and do not apply to flat painted surfaces.

Directions (liquid form):
SHAKE WELL BEFORE USING. Surface should be clean and dry. Clean and wipe surfaces well. Pour a small quantity of polish on a clean, soft, lint-free cloth and apply in the conventional manner. For stainless steel and formica apply with dampened sponge. USE SPARINGLY. OZ does not require excessive rubbing – the surface brightens immediately and will not show finger marks. Previously waxed and oil polished surfaces can cause smudging because of build up. If so, remove with mild detergent and warm water before applying OZ. Keep from freezing and do not apply to flat painted surfaces.

Safety Cautions:
Contents are EXTREMELY FLAMMABLE. Vapors may ignite EXPLOSIVELY. Keep away from heat, sparks and open flame. During use and until all vapors are gone, keep area well ventilated. Avoid breathing of vapor and spray mist. USE ONLY WITH ADEQUATE VENTILATION. Avoid contact with skin and eyes. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. KEEP OUT OF REACH OF CHILDREN.