Application temperature:
Above 50°F.
Service temperatures:
3-5 minutes (70°F./50%RH)
Method of application:
10-15 minutes (70°F./50%RH)
Minimum required spread:
Approximately 6 mils or 250 square feet per gallon
Required clamping pressure:
Enough to bring joints tightly together (generally, 100-150 psi for so woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond No-Run, No-Drip is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
