Preparation
Recommended weathering duration: soft/coniferous woods such as Larch or Douglas Fir, approx. 6 weeks; freshly pressure impregnated, thermo treated or tropical wood species etc., approx. 12 weeks.
Use Osmo Wood Reviver Power Gel to clean the wood surface and remove grey wood cells before renovating the area. Wood surface must be clean, dry and frost-free (moisture content max. 20 %).
Osmo Decking-Oil is ready to use – please do not thin. Stir well. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. Always wear a dust mask when sanding.
The finished surface is, among other things, influenced by the wood’s natural characteristics, therefore a trial application is required before finishing.
Application
Apply thinly and evenly along the wood grain with either an Osmo hand brush or the Osmo Microfibre Roller, and spread well. Allow for good ventilation whilst drying. Apply a second coat as before.
When renovating one coat, applied to the clean and dry surface, will usually be sufficient.
Drying time
Approx. 12 hours (normal climatic conditions, 23°C/50% normal humidity). Lower temperatures and/or high humidity can increase the drying time.
Coverage
Approx. 24 m²/litre (260 sq ft / L)
Note: Product coverage depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces, e.g. grooved or ribbed, may lead to reduced coverage.
Depending on the wood species and its natural characteristics (e.g. surface), specific results may vary. Therefore, a trial application is always required.
Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Contains 2- butanonoxime. May produce an allergic reaction. If medical advice is needed, have product container or label at hand. Use only outdoors or in a well-ventilated area.
