Finico Water-based Varnish by Finico


4.8/5 · 5 reviews
from $9.95
Free Delivery
on orders over $90
Quebec, Ontario · More info

Water-based polyurethane for floors, furniture and other wooden surfaces. Finico Water-based Varnish is very resistant and easy to apply, it maintains the original wood color and can be applied over most stain and varnish.

• Low VOC rate
• Odorless
• Doesn’t yellow

Directions for use

Product preparation

Vigorously shake the container and let stand 10 minutes before applying.


The application must be made at an ambient temperature above 15 °C. Apply varnish in the direction of the wood grain using a synthetic bristle paintbrush, a foam applicator or a 10 mm paint roller. Between coats, let it dry for 3 hours before sanding with 220 grit sandpaper.

Number of coat

  • On bare or stained floor: 3 coats
  • On previously varnished floor: 2 coats

Drying time

  • Between coats: 3 hours
  • Cautious traffic: 8 hours
  • Put back the furniture: 48 hours
  • Put back the carpet: 7 days
  • First damp cleaning: 10 days


100 to 130 sq ft / L


250 ml · Matt $9.95 Out of stock
250 ml · Satin $9.95 Out of stock
250 ml · Semi-Gloss $9.95 In stock
946 ml · Matt $29.95 Out of stock
946 ml · Satin $29.95 In stock
946 ml · Semi-Gloss $29.95 In stock
3.78 L · Matt $89.95 Out of stock
3.78 L · Satin $89.95 Out of stock
3.78 L · Semi-Gloss $89.95 In stock


Classification Wood Varnishes
Brand Finico
  • 250 ml
  • 946 ml
  • 3.78 L
Sold Since January 11, 2017

Water, polyurethane resin, organic solvent and diethylene glycol monobutyl ether.


100 to 130 sq ft / L


80 g / L




8 to 12 years


Milky liquid


Store between 15 to 30 °C, sensitive to frost. If the product has frozen, allow the product to thaw at room temperature for 24 hours without stirring.

Tools cleaning



Compatible with most wood stains, oils, varnishes, lacquers and paints. It’s strongly recommended reading carefully the technical sheet of the product and making prior test to ensure the propriety and compatibility of the products.


Matt, Satin, Semi-gloss


Soapy water

  • Microfiber roll 10 mm
  • Flexible Poly Nylon Brush
  • Spray gun with 1.3 or 1.4 mm nozzle

Similar Products

Complementary Products


Nice, easy to apply

Etienne Ringuet · Jun 8, 2017

I used this product in satin to coat table tops. I can't talk about durability yet but it was easy to apply and the finish looks great. I used a Fuji XPC gun and Super4 turbine to spray. The gun had a 1.4 tip and I opened the fluid control 1.25 turns. I didn't have to thin this product.

There are 4 reviews in French for this product.

Display Reviews in French

Terms of Sales · Privacy · En français