This article has been discontinued, it is no longer available and will not be renewed.

Finico Water-based Varnish by Finico

Discontinued

4.8/5 · 5 reviews

Water-based polyurethane for floors, furniture and other wooden surfaces. Finico Water-based Varnish is very resistant and easy to apply, it maintains the original wood color and can be applied over most stain and varnish.

• Low VOC rate
• Odorless
• Doesn’t yellow

Directions for use

Product preparation

Vigorously shake the container and let stand 10 minutes before applying.

Application

The application must be made at an ambient temperature above 15 °C. Apply varnish in the direction of the wood grain using a synthetic bristle paintbrush, a foam applicator or a 10 mm paint roller. Between coats, let it dry for 3 hours before sanding with 220 grit sandpaper.

Number of coat

  • On bare or stained floor: 3 coats
  • On previously varnished floor: 2 coats

Drying time

  • Between coats: 3 hours
  • Cautious traffic: 8 hours
  • Put back the furniture: 48 hours
  • Put back the carpet: 7 days
  • First damp cleaning: 10 days

Covering

100 to 130 sq ft / L

Specifications

Classification Wood Varnishes
Brand Finico
Sold Since January 11, 2017
Composition

Water, polyurethane resin, organic solvent and diethylene glycol monobutyl ether.

Coverage

100 to 130 sq ft / L

VOCs

80 g / L

Origin

Italy

Durability

8 to 12 years

Aspect

Milky liquid

Storage

Store between 15 to 30 °C, sensitive to frost. If the product has frozen, allow the product to thaw at room temperature for 24 hours without stirring.

Tools cleaning

Water

Compatibility

Compatible with most wood stains, oils, varnishes, lacquers and paints. It’s strongly recommended reading carefully the technical sheet of the product and making prior test to ensure the propriety and compatibility of the products.

Luster

Matt, Satin, Semi-gloss

Maintenance

Soapy water

Tools
  • Microfiber roll 10 mm
  • Flexible Poly Nylon Brush
  • Spray gun with 1.3 or 1.4 mm nozzle

Similar Products

Complementary Products

Review

Nice, easy to apply

NameWitheld · Jun 8, 2017

I used this product in satin to coat table tops. I can't talk about durability yet but it was easy to apply and the finish looks great. I used a Fuji XPC gun and Super4 turbine to spray. The gun had a 1.4 tip and I opened the fluid control 1.25 turns. I didn't have to thin this product.

There are 4 reviews in French for this product.

Display Reviews in French
          

Terms of Sales · Privacy · Cookies · En français